What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 05:48

“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
A fuse is a non-resetable over current circuit protector.
First Sentence:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
One
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but I think this circuit , shows a few more pieces.
This is where the MOV conducts again, and dissipated the energy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
A circuit breaker is similar, but is resettable.
'The Life of Chuck' might leave you brushing away tears — or scratching your head - NPR
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The other is “what does a “fuse” do?”
Edit 2024–10.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Women like what they hear while men like what they see, it that true?
He then asserts :
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
He then describes the function of a fuse.
These are simplified answers to the original question, and does not change anything I wrote above.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What is it that gives a man who is a submissive cock sucker his most pleasure?
What does a fuse do?
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Science-Backed Tips for Increasing Your Stamina at Any Age - Prevention
But it can get overloaded, and no longer works.
This one hit behind the barn.
nine
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–10[John johnson John Johnson ]
This is 'the assistant's answer'
He then describes Rainy Season and Lightning.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
In schematic diagrams this is the symbol for a fuse:
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
what exactly is a ‘surge’ protector?
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
An AC voltage/ current source, and an ac inductive load.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This device then solves the entire problem.
One is “what exactly is in a ‘surge protector’ ? ”
a photo is worth a thousand words.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
At least they know the answer if they wanted it.
This is where this question deviates from being a 'generic' question, and becomes more specific.
I post the exact comment here.
What is lightning?
The bolt then partially travels down the line to your home.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
For this case there are devices called Metal oxide varistors (MOV).
eight
There are two important concepts here.
Here is a simplified AC power diagram.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(Dc diagram shown, AC is similar).
At one ohm, the resistor has a maximum of 1 watt power.
These devices are installed between the “hot” and “neutral” and protective ground.
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Now when you have a certain ac resistance, then a current flows in a loop.
The third is lightning and “how it gets conducted into a home.”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.